Skip to content
Octopus Consultancy Limited

Water Services

Water Towers Construction

Gravity-fed water pressure and storage in one structure: a properly engineered tower that keeps water flowing even when the pump is off.

  • NEMA Firm of Experts
  • Operating since 2014
  • Offices in Nairobi and Ruiru

Who needs it

  • Boreholes supplying several buildings or a whole compound
  • Schools, hospitals and institutions
  • Estates and community water schemes
  • Farms needing gravity-fed irrigation or livestock water
  • Sites with unreliable power for pumping

What you receive

  • Structural design for the tank load and site conditions
  • Foundation construction
  • Steel or reinforced concrete tower
  • Tank installation and pipework connection
  • Handover with maintenance guidance

Legal basis

  • County building approvals where required
  • Structural design to recognised engineering standards

A water tower is an elevated structure supporting a water tank at a height sufficient to pressurise a water supply system. It provides both storage and gravity pressure for distributing water to buildings, taps and irrigation.

Water towers are a simple, reliable way to supply water around a compound, estate or community. The pump fills the tank when power is available, and gravity does the rest.

What we build

  • Steel water towers. Fabricated steel structures, quick to erect and suitable for a wide range of tank sizes.
  • Reinforced concrete towers. Durable, low-maintenance structures for long-term use.
  • Tank stands. Lower stands for domestic and small institutional tanks.

Design matters

A tower carries a heavy and changing load: a full tank, plus wind on the tank and structure. Our towers are designed for the full weight of the water, the wind and the ground conditions, and built on engineered foundations. Poorly built tank stands are a real safety hazard, and failures can be catastrophic.

Our process

  1. Site assessment. We assess the site, the ground conditions and where the water needs to go.
  2. Design. We calculate the tower height and tank capacity needed, and design the structure and foundation.
  3. Construction. We build the foundation and erect the tower.
  4. Installation. We install the tank and connect the inlet, outlet, overflow and distribution pipework.
  5. Handover. We test the system and advise on inspection and maintenance.

Frequently asked questions

Why put a tank on a tower?

Height creates pressure. A tank on a tower supplies water by gravity, so taps keep running without a pump running all the time. That saves energy and keeps water flowing during power outages.

How high should the tower be?

It depends on the pressure you need at the furthest and highest outlet, the distance the water must travel, and the pipe sizes. We calculate the height needed for your site.

Steel or concrete tower?

Steel towers are quicker to build and can be relocated. Reinforced concrete towers are very durable and need little maintenance. We advise on the best choice for your capacity, budget and site.

Is the tower safe for a full tank?

A full tank is a very heavy load, and wind adds more. That is why towers must be properly designed and built on an engineered foundation. Never place a tank on an improvised stand.

Request a quote for Water Towers Construction

Share a few details about your project and a consultant will get back to you.

We only use your details to respond to this enquiry.
Prefer to talk? Call +254 724 117 068 or WhatsApp us.